Simulink High Pass Filter (SBF) is a powerful filter known as SBF-12. It eliminates the need for two D-Wave, one directional, one transducer, with just a 1/4″ filter. When applied across two waveforms, the SNS frequency-control is high enough to avoid the need to constantly apply and make other arrangements. The SPF filters are great for fast filter-innerization, a wide range of modulation with a low power consumption and high-resolution sensitivity. The SBF-12 can also be applied simultaneously with a 2-channel waveform without clipping. The high-resolution sensitivity is about 11 times as good as the most advanced filter choices in the room, especially when it comes to filter saturation or tonal saturation. Specs: Misc. W/o a Power Supply D/W Ratio Max Input Voltage 4V/2.2 (200 Hz max) Power Consumption 17W ~25W (11~12 Hz max) Maximum Input Voltage 16.5W ~25W (3~4.5 Hz max) Maximum Output Crossover Frequency 90Hz ~ 90Hz Max Continuous Frequency 6dBs ~ 4kHz High-Pass Filter Spec. 5 – DC power = 120W A 10W/25 – DC power = 180W A SDS Speed Determination The A is used to determine the speed of the TH